Part Number Hot Search : 
1N4742A BU208 A1201 1N6626U 7C331 P80C31 PE3311 OM230
Product Description
Full Text Search
 

To Download OP11E Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 a
FEATURES Guaranteed VOS: 500 V Max Guaranteed Matched CMRR: 94 dB Min Guaranteed Matched VOS: 750 V Max LM148/LM348 Direct Replacement Low Noise Silicon-Nitride Passivation Internal Frequency Compensation Low Crossover Distortion Continuous Short-Circuit Protection Low Input Bias Current
Quad Matched 741-Type Operational Amplifiers OP11
PIN CONFIGURATIONS 14-Lead Epoxy DIP (P Suffix)
OUT A -IN A +IN A V+ 1 2 3 4 14 OUT D 13 -IN D 12 +IN D 11 V- 10 +IN C 9 -IN C 8 OUT C
+IN B 5 -IN B 6
OUT B 7
GENERAL DESCRIPTION
The OP11 provides four matched 741-type operational amplifiers in a single 14-lead DIP package. The OP11 is pin compatible with the LM148, LM348, RM4156, RM4158, and HA4741 amplifiers. The amplifier is matched for common-mode rejection ratio and offset voltage which is very important in designing instrumentation amplifiers. In addition, the amplifier is designed to have equal positive-going and negative-going slew rates. This is an important consideration for good audio system performance. The OP11 is ideal for use in designs requiring minimum space and cost while maintaining performance.
14-Lead Hermetic DIP (Y Suffix)
OUT A -IN A +IN A V+ 1 2 3 4 14 OUT D 13 -IN D 12 +IN D 11 V- 10 +IN C 9 -IN C 8 OUT C
+IN B 5 -IN B 6
OUT B 7
V+
-IN +IN
OUTPUT
V-
Figure 1. Simplified Schematic
REV. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781/329-4700 www.analog.com Fax: 781/326-8703 (c) Analog Devices, Inc., 2002
OP11-SPECIFICATIONS
ELECTRICAL CHARACTERISTICS (@ V =
S
15 V, TA = 25 C, unless otherwise noted)
OP11A/OP11E Min Typ Max 0.3 5.5 180 0.17 12 0.29 13 120 4 11 100 13 650 105 0.7 18 14 12 17 1.8 1.5 1.2 100 0.7 130 1.0 16 3.0 110 15 145 25 100 0.7 11 2.4 180 32 11 100 0.5 20 300 0.1 12 100 Min OP11F Typ 0.6 25 300 0.17 13 120 4 13 650 123 0.7 18 14 12 17 1.8 1.5 1.2 130 1.0 16 3.0 110 15 145 25 0.7 11 2.4 180 32 11 50 Max 2.5 50 500 0.1 12 70 Min OP11G Typ 1.2 75 300 0.17 13 100 10 13 500 210 0.7 18 14 12 17 1.8 1.5 1.2 130 1.0 16 3.0 110 15 145 25 340 100 Max 5.0 200 500 Unit mV nA nA MW V dB mV/V V V/mV mW mV p-p nV//Hz nV//Hz nV//Hz pA p-p pA//Hz pA//Hz pA//Hz dB V/ms kHz MHz ns %
Parameter Input Offset Voltage Input Offset Current Input Bias Current Input Resistance Differential Mode1 Input Voltage Range Common-Mode Rejection Ratio Power Supply Rejection Ratio Output Voltage Swing Large-Signal Voltage Gain Power Consumption2 Input Noise Voltage Input Noise Voltage Density Input Noise Current Input Noise Current Density Channel Separation Slew Rate
2
Symbol VOS IOS IB RIN IVR CMRR
Conditions RS = 10 kW
VCM = 12 V, RS = 10 kW VS = 5 V to 15 V, RS 10 kW RL = 2 kW RL 2 kW, VO = 10 V VO = 0 V 0.1 Hz to 10 Hz fO = 10 Hz fO = 100 Hz fO = 1 MHz 0.1 Hz to 10 Hz fO = 10 Hz fO = 100 Hz fO = 1 MHz
100
PSRR VO AVO Pd en p-p en
In p-p In
CS SR VO = 20 V p-p BW tf OS AVCL = 1 AV = 1, VIN = 50 mV
Large Signal Bandwidth3 Closed-Loop Bandwidth4 Rise Time Overshoot
3 3
11 2.4
NOTES 1 Guaranteed by input bias current. 2 Total dissipation for all four amplifiers in package. 3 Sample tested. 4 Guaranteed by rise time. Specifications subject to change without notice
-2-
REV. A
OP11 ELECTRICAL CHARACTERISTICS
Parameter Input Offset Voltage Average Input Offset Voltage Drift1 Input Offset Current Average Input Offset Current Drift Input Bias Current Input Voltage Range Common-Mode Rejection Ratio Power Supply Rejection Ratio Large-Signal Voltage Gain Output Voltage Swing Power Consumption2
NOTES 1 Guaranteed but not tested. 2 Total dissipation for all four amplifiers in package. Specifications subject to change without notice
1
(@ VS = 15 V, 55 C TA otherwise noted)
Conditions RS 10 kW RS 10 kW
125 C for OP11A, 0 C TA 70 C for OP11E, unless
OP11A Typ Max 0.4 2.0 20 0.1 200 12 13 120 4 50 11 250 13 115 200 32 50 11 1.0 10 40 0.3 375 12 100 OP11E Typ Max 0.4 2.0 14 0.1 200 13 120 4 250 13 115 200 32 0.8 10 30 0.3 350
Symbol VOS TCVOS IOS TCIOS IB IVR CMRR PSRR AVO VO Pd
Min
Min
Unit mV mV/C nA nA/C nA V dB mV/V V/mV V mW
VCM = 12 V, RS 10 kW VS = 5 V to 15 V, RS 10 kW RL 2 kW, VO = 10 V RL 2 kW VO = 0 V
100
ELECTRICAL CHARACTERISTICS (@ V =
S
15 V,
40 C TA +85 C, RS 100
Min
, unless otherwise noted)
Min OP11G Typ Max 1.5 4.0 250 0.3 400 12 70 32 25 11 200 13 100 10 100 13 250 400 100 300 0.6 800 6 .0 Unit mV mV/C nA nA/C nA V dB mV/V V/mV V mW
Parameter Input Offset Voltage Average Input Offset Voltage Drift Input Offset Current Average Input Offset Current Drift1 Input Bias Current Input Voltage Range Common-Mode Rejection Ratio Power Supply Rejection Ratio Large-Signal Voltage Gain Output Voltage Swing Power Consumption
2
Symbol VOS TCVOS IOS TCIOS IB IVR CMRR PSRR AVO VO Pd
Conditions RS 10 kW RS 10 kW
OP11F Typ Max 0.8 4.0 40 0.3 400 3.0 15 60 0.6 550
12 VCM = 12 V, RS 10 kW VS = 5 V to 15 V, RS 10 kW RL 2 kW, VO = 10 V RL 2 kW VO = 0 V 50 11 100
13 120 4 250 13 115
NOTES 1 Guaranteed but not tested. 2 Total dissipation for all four amplifiers in package. Specifications subject to change without notice
REV. A
-3-
OP11
ABSOLUTE MAXIMUM RATINGS*
Supply Voltage (VS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 V Input Voltage* . . . . . . . . . . . . . . . . . . . . . . . . . Supply Voltage Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . 30 V Output Short-Circuit Duration . . . . . . . . . . . . . . . Continuous (One Amp Only) Storage Temperature Range Y Package . . . . . . . . . . . . . . . . . . . . . . . . -65C to +150C P Package . . . . . . . . . . . . . . . . . . . . . . . . . -65C to +125C Lead Temperature Range (Soldering, 60 sec) . . . . . . . . 300C Operating Temperature Range OP11A . . . . . . . . . . . . . . . . . . . . . . . . . . . -55C to +125C OP11E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0C to 70C OP11F, OP11G . . . . . . . . . . . . . . . . . . . . . -40C to +85C
*Absolute maximum ratings apply to both DICE and packaged parts, unless otherwise noted.
Package Type 14-Lead Plastic DIP (P) 14-Lead Hermetic DIP (Y)
JA*
JC
Unit C/W C/W
83 108
39 15
*qJA is specified for worst-case conditions, i.e., qJA is specified for device in socket for CERDIP and P-DIP packages.
ORDERING GUIDE
Model OP11AY* OP11EP OP11EY* OP11FP* OP11GP
Temperature Range -40C to +125C -40C to +125C 0C to 85C -40C to 85C -40C to 85C
Package Description 14-Lead CERDIP 14-Lead Epoxy DIP 14-Lead CERDIP 14-Lead Epoxy DIP 14-Lead Epoxy DIP
Package Option Y-14 P-14 Y-14 P-14 P-14
*Not for new designs. Obsolete April 2002.
For Military processed devices, please refer to the Standard Microcircuit Drawing (SMD) available at www.dscc.dla.mil/programs/milspec/default.asp SMD Part Number 5962-89801012A 5962-8980101CA ADI Equivalent OP11ARCMDA OP11AYMDA
MATCHING CHARACTERISTICS (@ V =
S
15 V, TA = 25 C, RS 100
Conditions VCM = 12 V VCM = 12 V
, unless otherwise noted)
OP11A, OP11E Min Typ Max 0.5 94 1 120 0.75 20 94 Min OP11F Typ Max 0.6 1 120 2.0 20 Unit mV mV/V dB
Parameter Input Offset Voltage Match Common-Mode Rejection Ratio Match
Specifications subject to change without notice
Symbol DVOS DCMRR
MATCHING CHARACTERISTICS +85 C for OP11F, R 100
Parameter Input Offset Voltage Match Common-Mode Rejection Ratio Match
Specifications subject to change without notice
(@ VS =
15 V,
55 C TA +125 C for OP11A, 0 C TA 70 C for OP11E, , unless otherwise noted) S
OP11A, OP11E Min Typ Max 0.6 1.0 20 94 Min
40 C TA
Symbol DVOS DCMRR
Conditions VCM = 12 V VCM = 12 V
OP11F Typ Max 1.0 3.2 110 2.5 20
Unit mV mV/V dB
94
3.2 110
CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although the OP11 features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
-4-
REV. A
Typical Performance Characteristics- OP11
0.1 VS = 15V 800 700 OPEN-LOOP GAIN - V/mV 600 500 400 300 200 100 0.5 60 40 20 0 20 40 60 80 TEMPERATURE - C 100 120 140 0 60 40 20 0 20 40 60 80 TEMPERATURE - C 100 120 140 VS = 15V RL = 2k
OFFSET VOLTAGE - mV
0.2
0.3
0.4
TPC 1. Input Offset Voltage vs. Temperature
TPC 4. Open-Loop Gain vs. Temperature
20 VS = INPUT OFFSET CURRENT - nA 15V
120 VS = 15V RL = 2k TA = 25 C CL = 100pF
100
0
OPEN-LOOP GAIN - dB
80
45
10
60 PHASE 40
90
135
5
20 180
0 60 40 20 0 20 40 60 80 TEMPERATURE - C 100 120 140
0 0.1
1.0
10
100 1k 10k FREQUENCY - Hz
100k
1M
10M
TPC 2. Offset Current vs. Temperature
TPC 5. Open-Loop Gain and Phase vs. Frequency
300 NORMALIZED VALUE REFERRED TO 25 C VS = 15V
1.4 VS = 1.3 1.2 1.1 1.0 0.9 0.8 BANDWIDTH 0.7 0.6 60 40 20 0 20 40 60 80 TEMPERATURE - C 100 120 140 60 40 20 0 20 40 60 80 TEMPERATURE - C 100 120 140 SLEW RATE 15V
INPUT BIAS CURRENT - nA
200
100
0
TPC 3. Bias Current vs. Temperature
TPC 6. Normalized Slew Rate and Bandwidth vs. Temperature
REV. A
-5-
PHASE LAG - Degrees
15
GAIN
OP11
800 700
OPEN-LOOP GAIN - V/mV
140 RL = 2k TA = 25 C 120 VS = 15V TA = 25 C
600 500 400 300 200 100 0
CHANNEL SEPARATION - dB
100 80 60 40 20 0 10
0
5
10 15 POWER SUPPLY VOLTAGE - V
20
100
1k FREQUENCY - Hz
10k
100k
TPC 7. Open-Loop Gain vs. Supply Voltage
TPC 10. Channel Separation vs. Frequency
140 120 100
CMRR - dB
1k
VS = 15V TA = 25 C
VOLTAGE NOISE DENSITY - nV/ Hz
VS = 15V TA = 25 C
100
80 60 40 20 0 1.0
10
10
100 1k FREQUENCY - Hz
10k
100k
1 10
100 1k FREQUENCY - Hz
10k
TPC 8. CMRR vs. Frequency
TPC 11. Voltage Noise Density vs. Frequency
140 120 100
PSRR - dB
100
VS = 15V TA = 25 C
CURRENT NOISE DENSITY - pA/ Hz
VS = 15V TA = 25 C
10
80 60 40 20 0 1.0
1
10
100 1k FREQUENCY - Hz
10k
100k
0.1 10
100 1k FREQUENCY - Hz
10k
TPC 9. PSRR vs. Frequency
TPC 12. Noise Current Density vs. Frequency
-6-
REV. A
OP11
16
OUTPUT VOLTAGE SWING - V
OUTPUT VOLTAGE - mV
20
VS = 15V RL = 2k TA = 25 C CL = 100pF
14 12 10 8 6 4 2 0 0.1
VS = 15V TA = 25 C
POSITIVE SWING
NEGATIVE SWING
0
20
0
200
400 TIME - ns
600
800
1 LOAD RESISTANCE TO GROUND - k
10
TPC 13. Transient Response
TPC 16. Output Voltage vs. Load Resistance
5
3 2
OUTPUT VOLTAGE - V
1 0 1 2 3
QUIESCENT CURRENT - mA
VS = 15V RL = 2k TA = 25 C CL = 100pF
TA = 25 C 4
3
2
1
0
2
4
6
8
10 12 TIME - s
14
16
18
20
0
0
10
20 30 TOTAL SUPPLY VOLTAGE - V
40
TPC 14. Voltage Follower Pulse Response
TPC 17. Quiescent Current vs. Supply Voltage
28 (27)
140
VS = 15V RL = 2k TA = 25 C
VS =
POWER CONSUMPTION - mW
15V
OUTPUT VOLTAGE PEAK-TO-PEAK - V
24 20 16 12 8 4 0 1k
130
120
110
100
10k 100k FREQUENCY - Hz 1M
60
40
20
0
20 40 60 80 TEMPERATURE - C
100
120
140
TPC 15. Maximum Output Swing vs. Frequency
TPC 18. Power Consumption vs. Temperature
REV. A
-7-
OUTLINE DIMENSIONS
Dimensions shown in inches and (mm).
14-Lead Epoxy DIP (P Suffix)
C02784-0-4/02(A)
0.325 (8.25) 0.300 (7.62) 0.195 (4.95) 0.115 (2.93) 0.015 (0.381) 0.008 (0.204) 0.320 (8.13) 0.290 (7.37) 0.060 (1.52) 0.015 (0.38) 15 0 0.015 (0.38) 0.008 (0.20)
0.795 (20.19) 0.725 (18.42)
14 1 8 7
0.280 (7.11) 0.240 (6.10)
PIN 1
0.100 (2.54) BSC
0.210 (5.33) MAX 0.130 (3.30) 0.160 (4.06) MIN 0.115 (2.93) 0.022 (0.558) 0.070 (1.77) SEATING PLANE 0.014 (0.356) 0.045 (1.15)
0.060 (1.52) 0.015 (0.38)
14-Lead Hermetic DIP (Y Suffix)
0.005 (0.13) MIN 0.098 (2.49) MAX
14 8 7
PIN 1
1
0.310 (7.87) 0.220 (5.59)
0.100 (2.54) BSC 0.785 (19.94) MAX 0.200 (5.08) MAX 0.200 (5.08) 0.125 (3.18) 0.023 (0.58) 0.014 (0.36)
0.150 (3.81) MIN SEATING 0.070 (1.78) PLANE 0.030 (0.76)
Revision History
Location Data Sheet changed from REV. 0 to REV. A. Page
Change OP-09/OP-11 to OP11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Global Edits to PIN CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Edits to Figure 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Edits to ABSOLUTE MAXIMUM RATINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Edits to ORDERING GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Edits to SPEC TABLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 Deletion of DICE CHARACTERISTICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Deletion of WAFER TEST LIMITS Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Deletion of TYPICAL ELECTRICAL CHARACTERISTICS Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
PRINTED IN U.S.A.
-8-


▲Up To Search▲   

 
Price & Availability of OP11E

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X